Drolet CS1200 Specifiche Pagina 1

DROLET WOODSTOVE MANUAL Model 5135 ML Manufactured by : DROLET STOVES & FIREPLACES INC. 1700, Léon-Harmel, Québec (Québec) G1N 4R9 00041

Air Circulation Systems In order to improve air circulation in the room where the woodstove is installed, certain options are available for specific

It is EXTREMELY IMPORTANT that you use DRY WOOD only in your woodstove. The wood must have dried for 9 to 15 months, such that the humidity content

Ignition The installation of a log cradle is NOT RECOMMENDED in your DROLET woodstove. After making sure that the stove air intake controls are ful

Heating Once you have obtained a good bed of embers you should reload the unit. In order to do so, open the air controls to maximum a few seconds pr

Keep in mind that the most difficult months for wood heating are October and November. Indeed, during this period, the atmosphere is often very heavy

Maintenance Of The Chimney Whether you have a prefab or masonry chimney, you must conduct a visual inspection at least once a month in order to be su

1700, rue Léon-Harmel, Québec (Québec) G1N 4R9 tel. : (418) 527-3060 fax : (418) 527-4311 e-mail : [email protected] web site : drolet .ca LIMITED

THE DROLET WOODSTOVE MANUAL TABLE OF CONTENTS The DROLET Woodstove Manual...

The DROLET Woodstove Manual DROLET STOVES AND FIREPLACES INC. one of the most important woodstove and fireplace manufacturers in Canada, congratulate

Your Drolet Stove Assembly 3

Refractory Bricks Assembly 4

Installation Of Your Drolet Woodstove Positioning The Stove It is very important to position the woodstove as close as possible to the chimney, and

You may decrease these clearances by installing heat radiation shields between the walls or the ceiling and the stove. These heat radiation shields

Chimney Your woodstove may be hooked up with a prefabricated or masonry chimney. If you are using a prefab chimney, it must comply with ULC S629 sta

Couplings Once the woodstove is placed in the room in accordance with required clearances, it must be coupled to the chimney with a smoke exhaust sys